Multicom
IOT
Argus · VISUAL INTELLIGENCE
Field Quick Reference
Operators · keep in the field kit
① Before you fly
Confirm
site authorization
/ licence on file
Battery charged, props & gimbal checked
Dry, low wind, even light (avoid harsh noon/low sun)
Note growth stage & weather for the log
② Capture settings (Matrice 4T)
Camera
nadir (−90°)
, straight down
Altitude
25–40 m
· target
≤1.5 cm/px
Overlap
80% front / 70% side
RAW/JPEG originals + thermal; steady, sharp
③ Start the uploader
RC Plus: run the Termux + rclone uploader
Laptop:
argus ingest --source <album> --field F1 --watch
Use a
scoped Spaces key
- never the master key
Leave it running the whole flight
④ After the flight
Confirm media finished uploading
Log the flight in
Drones & Edge
(alt / battery / area)
Watch the
bell
- cannabis & low-confidence go to Review
Verify each flagged item (Approve / Reject)
⚑ Alert cheat-sheet
Cannabis confirmed / new
→ verify on map + review
Review backlog
→ assign reviewers
Device offline / hot / disk full
→ check the Jetson
Backup failed
→ tell admin now
✔ Golden rules
Cannabis =
candidate for human review
, not proof
No master keys on field devices
No flight without site authorization
Positions are GPS-level unless RTK is used
⚙ Quick fixes
Map blank → Mapbox token / flight had no GPS
Device offline → restart the heartbeat agent
Locked out → wait ~5 min, then correct passphrase
Alerts silent → external channels need setup (admin)
☎ Support
Email
info@multicomgh.com
In-app:
Help & Guide
(top-bar ?)
Status:
/health
Include page, action, and what you expected
Print A4 · fold in the drone case
Developed by
Multicom
IOT